BL Technical Service Bulletins 1967-68-69 Section G
- Details
- Category: Service Bulletins
- Published: Thursday, 04 February 2021 01:50
- Written by Super User
- Hits: 7924
Technical Service Bulletins
Index 1967-68-69
Section G Miscellaneous
Bulletin Number | Date | Model Range | Subject |
---|---|---|---|
2_G_1 | 30 January 1967 | Warranty Credits for Lubricants | |
2_G_2 | 30 January 1967 | Customer Identification Plates | |
2_G_3 | 30 January 1967 | Technical Service Bulletin Binders Index for 1966 | |
2_G_4 | 14 March 1967 | Passport-to-Service | |
2_G_5 | 28 April 1967 | All Models | Recommended Lubricants |
2_G_6 | 28 April 1967 | Maintenance of Wet Charged Batteries on New Vehicles | |
2_G_7 | BMC Tool Board | ||
2_G_8 | Claim Submitted for 1000-Mile Services | ||
2_G_9 | Austin Healey Sprite MK IV, MG Midget III | Owners Handbooks – AKD 4850 and AKD 4849 | |
2_G_10 | MGB | Optional Fan Part #CA 3231 with Coolaire Air Conditioning | |
2_G_11 | Vehicle Serial Number Suffix | ||
2_G_12 | Mini and 1100 Range | Inner Drive Coupling and ‘U’ Bolts | |
2_G_13 | Warranty Customer Identification Plate | ||
2_G_14 | 1100 Automatic | Service Tools | |
2_G_15 | 1100 Automatic | Service Tools | |
2_G_16 | Part Number HAC 60 | BMC Special Tool Synchro-Check All Dual Carburetter Models | |
2_G_17 | 15 January 1968 | HAC 61, SU Carburetter Piston Loading Tool for Exhaust Emission Control Tuning | |
2_G_18 | 15 January 1968 | BMC Approved Performance Test Equipment, Marquette Corporation | |
2_G_19 | 15 January 1968 | 1968 Vehicles | Customer I.D. Plate Holder |
2_G_20 | 1 March 1968 | Passport-to-Service | |
2_G_21 | 1 March 1968 | Exhaust Emission Manual AKD 4957 | |
2_G_22 | 1 May 1968 | MGB, MGB/GT, Austin America from 1968 on | Commission Numbers |
2_G_23 | 1 April 1968 | Austin America | Warranty Policy and Procedures Extended Warranty |
2_G_24 | 1 April 1968 | Austin Healey Sprite, MG Midget and Austin America | 18G 1002 Piston Wrist Pin Remover and Replacer Tool |
2_G_25 | 3 June 1968 | Warranty Registration Cards Zip Coded | |
2_G_26 | MGB, MGB/GT, Sprite, Midget, Austin America | Schedule of Repair Times | |
2_G_27 | All Models | BMC Special Tools, Minimum Tool Requirements | |
2_G_28 | 16 October 1968 | All Models | Additional BMH Special Tools Available |
2_G_29 | Tool 18G 579 – Transverse Transmission First/Third Motion Shaft Bearing Replacer | ||
2_G_30 | 16 October 1968 | MGC, MGC GT | Technical Data |
2_G_31 | 1 February 1969 | All Models | Operational Time Change Request Form |
2_G_32 | 1 February 1969 | Austin/MG Division | Re-Designed Bulletin Paper |
2_G_33 | Austin/MG Division | 1,000 Mile Inspection Allowance | |
2_G_34 | Austin America | 3rd to 4th Gear Slip or Flare-Up – Automatic Transmission | |
2_G_35 | 1 May 1969 | Austin America | Extended Warranty |
2_G_36 | 1 July 1969 | Austin America | 3rd to 4th Gear Slip or Flare-Up – Automatic Transmission |
2_G_37 | 20 August 1969 | Austin America | Remover/Replacer – Oil Seal – Primary Gear |
2_G_38 | 20 August 1969 | MGC | Shop Manual |
2_G_39 | 20 August 1969 | All Models | Schedule of Repair Times HAC 38 (Revised Edition) |
2_G_40 | 1 October 1969 | All Models | Austin/MG Special Service Tools, Minimum Tool Requirements |
2_G_41 | 1 October 1969 | All Models | Additional Austin/MG Special Service Tools |
2_G_42 | 1 December 1969 | All Models | Austin/MG Special Service Tools, Minimum Tool Requirements |
2_G_43 | 1 December 1969 | All Models | Austin/MG Tool Board, Existing and Additional Section DID 13 and DID 13/3 |